DZ30SLE RCD Residual Current Device

You can contact me through this:

15626588735

This is my mailbox:

info@jiguantrading.com

Where can you find me:

Room 1401-30, 14th Floor, Unit 1, Liandu Mansion, Futian Subdistrict, Yiwu City, Jinhua City, Zhejiang Province, China.

Description

SCOPE OF APPLICATION

DZ30SLE is a very narrow A-type residual current circuit breaker. The width of the conventional 2P residual current circuit breaker is 81MM wide. Our product is only 18MM wide, which reduces the volume by 4 times and greatly increases the space utilization. This product is suitable for circuits with a working frequency of 50/60Hz, a rated working voltage of 230V or 110V, and a rated current of 10A-32A, in line with the international standard IEC61009-1.
AC type leakage circuit breaker: used for leakage protection of AC electricity; Type A leakage circuit breaker: It includes the protection function of AC type AC leakage current, and also has the protection function of pulsating DC leakage current; Remarks: Pulsating DC is some equipment that converts AC to DC, such as mobile phone chargers, electric vehicle chargers, switching power supplies, etc.

CONNECTION

Rated current In(A) Minimum Adapter Copper Wire
6 1 MM2/17AWG
10 1.5 MM2/16AWG
16 1.5 MM2/16AWG
25 2.5 MM2/13AWG
32 4 MM2/11AWG

MAIN TECHNICAL PARAMETERS

Rated Current 6A,10A,16A,25A,32A
Poles 1P+N
Rated Voltage Ue AC230V or AC400V
Insulation Voltage Ui 500V
Rated Impulse Withstand Voltage(1.2/50) Uimp 2kV
Rated Breaking Capacity 4500A
Rated residual operating current L△n(mA): 15mA, 30mA, 100mA, 300mA
Rated frequency 50/60Hz
Leakage tripping Electronic Type
Dielectric Test Voltage At And Ind . Freq . For 1min 1kA
Protection Class IP20
Current Tripping Curve C-Curve (5-10ln)
Electrical Life 4000
Mechanical Life 20000
Installation 35MM DIN Rail Mount or M3 Screw Side Mount
Reference Temperature For Setting Of Thermal Element 30°C
Ambient Temperature -5°C~+40°C
Terminal Connection Type Phillips Screws
Adapter Cable 1-10mm2 7AWG
Tightening Torque 2.0N.M
Standards IEC61009-1

TEMPERATURE COMPENSATION

When the ambient temperature is not a benchmark of 30 degrees , the reference correction factor is as folows .

Ambient Temperature -20℃ -10℃ 0℃ 10℃ 20℃ 30℃ 40℃ 50℃ 60℃
Current Correction Coefficient 1.25 1.2 1.15 1.10 1.05 1.00 0.95 0.90 0.85

Reviews

There are no reviews yet.

Be the first to review “DZ30SLE RCD Residual Current Device”

Your email address will not be published. Required fields are marked *